In today's society, wire and cable are widely used, which greatly facilitates people's lives. If the wire and cable are used and maintained improperly, it may cause some safety hazards, which will lead to accidents, especially the occurrence of fire. In order to make the wire and cable play a better role, we should regularly maintain the wire and cable, which can save resources and reduce the cost of power resources. However, many people do not know much about the maintenance of wire and cable, do not know where to start, Tianxing cable will take you to understand how to do daily maintenance of wire and cable.

First, installation environment

The service life of the wire, in addition to the quality of the wire, also depends on the installation environment of the wire. The insulation layer is an important part of the control of the length of wire life, if the long-term in a humid environment, the insulation layer will be corroded, the insulation performance begins to gradually decline, causing the problem of wire aging cracking or falling off. This phenomenon is very likely to cause fire accidents, resulting in casualties. Therefore, when installing home wires, be sure to avoid wet places with water, and try to avoid direct sunlight to extend the service life of the wires.

2. Daily use

We understand the installation environment of the wire, and we should pay more attention in the daily use process. With the continuous improvement of social and economic level, household appliances such as dishwashers, sweeping robots, and humidifiers have gradually increased, resulting in frequent overload of household lines. Overload electricity will cause the local temperature of the wire to be too high, which accelerates the aging of the insulation layer, reduces the service life of the wire, and causes the short circuit of the wire to cause a fire accident. When we use electricity daily, we should try to avoid the simultaneous use of high-power appliances. In addition, in the special weather of rainy days, we should close the doors and Windows, try not to use electrical appliances, cut off the power supply, and do daily maintenance of the wire.

Third, special inspection

In order to ensure the safety of household electricity, we should regularly carry out safety checks on household lines and electrical equipment. At least once a year to invite the electrician to conduct a comprehensive inspection, especially the use of a long time in the family wire, to check the aging of the wire, damage and other problems, timely maintenance or replacement, to prevent the risk of electric shock, leakage, to ensure the normal operation of the family line, improve the service life of the wire.

Fourth, the placement

For the installation of the wire, try to install it in the place where it cannot be touched daily to reduce the damage of the wire body. In addition, the wire should also choose a dry and ventilated area, avoid the place with water, so as to avoid cable damage caused by humidity, electric shock, and leakage risk.

5. Avoid overload operation

If the family wire has been in an overloaded operating state, it is bound to shorten the service life of the wire. Therefore, when using the wire, we should keep the electricity below the rated power of the wire as far as possible to avoid the problem of wire burning.

Correct and effective maintenance methods can alleviate the aging of wire and cable insulation. Wires and cables used for a long time will inevitably lead to the aging of insulation materials. Effective protection methods can not only prevent current waste, but also extend the aging period of insulation.

When in use, it is necessary to extend the life of the wire and cable, but this is not simple, it requires both the excellent quality of the wire and cable itself, but also the timely maintenance and maintenance of the wire and cable on a daily basis, so as to create a safe and comfortable living environment. In order to improve the safety of home circuits, Tianxing Cable recommends that you use low-smoke halogen-free flame retardant cables as home wiring.





The above content is the content that Tianxing cable shares for you in this issue, I hope it will be helpful to you

Qingdao Tianxing Cable Co., Ltd. is a high-tech enterprise specializing in the production of wire and cable in Shandong Province, with more than 150 sets of domestic excellent cable production equipment and testing equipment, excellent production technology, modern testing equipment, to ensure stable product quality and timely supply. The main products of the company are power cables, low smoke halogen free cables, photovoltaic cables, aluminum alloy cables, shielding cables, radiation crosslinking cables, control cables, computer cables, high life cables, flame retardant series wire and cable.

(Part or all of the article is reproduced from the network, only for transmission, if copyright, please contact, please understand.)