YC rubber sheathed cable is a kind of soft and mobile cable with multiple strands of fine copper wire as conductor and rubber insulation and rubber sheathed. Generally speaking, including general rubber sheath flexible cable, welding machine cable, submersible motor cable, radio device cable and photographic light source cable and other varieties.

YC rubber sheathed cable specifications and implementation standards


Model number

specification

Executive standard



one-core

2-core

3-core

4-core

5-core

6-core

(three small) main line core

60245IEC53(YZ)

60245IEC57(YZW)

_

0.75-2.5



GB/T 5013-2008

60245 IEC 66(YC W)

1.5-400.

1.0-25

1.0-95.

1.0-150.

1.0-25

_

GB/T 5013-2008

YZ

YZW

_

4 to 6

0.75-6

1.5-6

JB/T 8735-2011

YC

1.5-400.

1.5-95.

1.5-150.

1.5-150.

1.5-150.

-

2.5-150.

JB/T 8735-2011

YCW

-

35-95.

120-150.

95-150.



2.5-150.

JB/T 8735-201


Operation method:

1, according to the vulcanization system of rubber set temperature and time;

2. Use rubber ink thinner to wash and repair the place, especially the joint should be fully treated;

3, according to the size of the gap appropriate cut repair adhesive material, pay attention to not too much or too little;

4. Plug the cut rubber material at the gap, pay attention to the rubber material not higher than the circumference of the wire;

5. Wrap with high temperature resistant PP belt. And put it into a tubular mold cavity slightly smaller than the wire diameter, lock the upper and lower molds, so that the filled position has a certain pressure. Note that the cavity diameter is slightly smaller than the wire diameter 0.1~0.2mm;

6, vulcanization time to take out the product, if there is a small amount of rubber overflow, with a sharp blade repair, and with diluent Sassafras can.

Cable main technical performance


Serial number



60245 IEC 53 (YZ), YZ

60245 IEC 57 (YZW), YZW

YC, 60245 IEC 66(YCW), YCW

1

Conductor DC resistance (Ω/km)

See table below

2

Voltage test

Nominal insulation thickness 0.6mm and below

After the finished cable is immersed in room temperature water for 1 hour, it is subjected to 50Hz, 1500V AC voltage test for 5 minutes without breakdown

After the finished cable is immersed in room temperature water for 1 hour, it is subjected to 50Hz, 2500V AC voltage test for 5 minutes without breakdown


Qingdao Tianxing Cable Co., Ltd. focus on supporting wire and cable production customization manufacturers, main: exports to more than 40 countries and regions around the world, the annual production capacity of 1 billion yuan. 6000 square meters of storage, standing hundreds of millions of inventory, order demand for rapid distribution and delivery, large prices more favorable. Qingdao cable manufacturer hotline: 16678668098