The concept of feet and feet

The foot meter in a cable is a unit used to express the specification and price of a cable. The foot meter refers to the length of the cable, and the foot square refers to the nominal cross-sectional area of the cable conductor. The concept of foot meter foot square originates from the material metering and quality control in the cable production process. First of all, the cable is composed of multiple wires, and the length and cross-sectional area of each wire will directly affect the quality and performance of the cable. Therefore, in the production process, each wire needs to be prepared for measurement and calculation to ensure that its length and cross-sectional area meet the standards. Secondly, the length and cross-sectional area of the cable also directly affect its safety and reliability in use. If the length or cross-sectional area of the cable is insufficient, the power transmission may be unstable, and even cause safety accidents such as fire. Therefore, cable manufacturers must ensure that each wire meets the standards in order to ensure the quality and safety of the cable.

Many customers in the purchase of cables, will pay special attention to the foot of the foot. This is because the cable can ensure the stability and safety of power transmission, and can also avoid various problems caused by insufficient length or cross-sectional area. In addition, the cable can also improve the reliability of the communication system, reduce signal loss and noise interference, so as to ensure the stability of the communication quality.

How to reach the feet

In order to ensure the full length of the cable, cable manufacturers need to take a series of production technology and quality control measures. For example, in the production process, it is necessary to use high-precision measuring instruments and technical means to accurately measure and calculate each wire. At the same time, it is also necessary to establish a sound quality management system, and carry out strict quality control and testing in all aspects of the production process. In addition, after the completion of production, the cable needs to be strictly inspected and tested to ensure that it meets national standards or customer requirements.

Why the emphasis on feet and feet

The main reason is that non-standard cables can not be feet, and normal 100m/ plate cables may only be 95m or even 90m, which is not enough meters. The normal 2.5 square cable, to achieve 1.5 square, is insufficient. Therefore, foot meter foot square is a very important concept in the cable industry, it refers to the length and cross-sectional area of the cable are in line with national standards or customer requirements. In the production of cables, it is very important to ensure the quality and safety of the cable, but also to improve the reliability of the communication system, reduce signal loss and noise interference.

Qingdao Tianxing Cable Co., Ltd. focuses on the production of customized wire and cable manufacturers, main: fire wire and cable, power cable, control cable and other products, exported to more than 40 countries and regions around the world, the annual production capacity of 1 billion yuan. 6000 square meters of storage, standing hundreds of millions of inventory, order demand for rapid distribution and delivery, large prices more favorable.