The key to avoid cable overload operation is to rationally plan and manage the load of the cable and ensure a good operating environment for the cable. Here are some suggestions:

1. Load Management

Know the rated load capacity of the cable and ensure that this limit is not exceeded in actual use.

For devices or systems that may generate large loads, separate cables should be routed to avoid sharing the same cable with other low-load devices.

Check the load of the cable regularly, especially during peak periods or seasonal load increases, to ensure that the cable is not overloaded for a long time.

2. Reasonable planning of cable wiring:

In the design stage, the possible load increase in the future is fully considered, and the appropriate cable specifications and types are selected.

For long-distance transmission or high-power loads, a cable with a larger cross-sectional area should be considered to reduce voltage drop and heat accumulation.

Cable wiring should avoid being too concentrated or too close to the heat source to reduce the impact of thermal radiation on the cable.

3. Strengthen cable maintenance and inspection:

Regularly check the connection parts of the cable, such as terminals, connectors, etc., to ensure that they are tight and reliable, without bad contact.

For the cable damage or aging phenomenon, it should be repaired or replaced in time to avoid the expansion of the problem leading to overload operation.

4. Use protective equipment:

Overload protectors or fuses are set in the cable line. When the cable load exceeds the rated value, these protection devices will automatically cut off the current and prevent the cable from running overloaded.

For important or sensitive cable lines, you can also consider the use of temperature monitoring devices, real-time monitoring of cable temperature changes, timely detection and treatment of overload problems.

5. Improve the safety awareness of users and maintenance personnel:

Provide training for use and maintenance personnel to improve their safety awareness and operational skills.

Develop and strictly enforce safety rules and regulations for cable use and maintenance to ensure that everyone can operate as required.

Through the implementation of the above measures, the problem of cable overload operation can be effectively avoided and the safe and stable operation of the cable can be guaranteed.

Qingdao Tianxing Cable Co., Ltd. focuses on the production of customized wire and cable manufacturers, main: fire wire and cable, power cable, control cable, home improvement wire and other products, exported to more than 40 countries and regions around the world, the annual production capacity of 1 billion yuan. 6000 square meters of storage, standing hundreds of millions of inventory, order demand for rapid distribution and delivery, large prices more favorable.