There are many kinds of wire and cable, flame retardant cable refers to under the specified test conditions, the sample is burned, after removing the test fire source, the flame spread only within a limited range, residual flame or residual burn in a limited time can self-extinguish the cable. Its characteristics are mainly manifested in that, in case of fire, the cable can limit the combustion to a local scope, do not produce spread, keep other various equipment, and avoid causing greater losse

The transmission of electrical energy necessarily requires transmission lines. However, in the busy areas of the city, there is not a single power line, why?

Qingdao Tianxing wire and cable Xiaobian to explain to you the performance of wire and cable, how to choose high-quality wire and cable. I hope our introduction can help you.

We know that now life is inseparable from electricity, of course, it is inseparable from wire and cable, due to the different use of different occasions for the selection of wire and cable is also different, high voltage cable, frequency conversion cable, flame retardant cable, etc., these different characteristics of the cable application site is different. Wire and cable manufacturing industry is a material finishing and assembly industry.

We all know that the resistivity of copper wire is low, the loss of electrical energy in the line is less, and the conductive effect is good, so it is generally used as a wire. However, the price fluctuation of copper wire is relatively large, which also affects the price fluctuation of wire and cable, the higher the price of copper material, the more expensive the wire and cable, on the contrary, the cheaper the copper cable is cheaper.

In the cold winter, many construction personnel will find that when laying and installing wire and cable, usually good quality wire and cable products, there will often be some wire body hard, insulation peeling damage and other phenomena, many construction personnel think that the wire and cable products themselves have quality problems, and cable manufacturers also insist that the product has been tested at the factory, is a qualified product. Often leads to misunderstandings between the two p